The new 4" travel Terrafirma Hydraulic bump stops require a serious mounting kit. To withstand the punishment associated with hammering over bumps and jumps considerable work has been involved in the production of these mounting kits. Designed as a bolt on kit to fit 90/110/130/D1 and RRCs with no modifications. Included in the bump stop mounting kits are spacers to allow for long travel shocks that require the compression movement to be restricted to avoid the shock bottoming out. The front kit operates in front of the front shock tower and utilises mostly Land Roverﾒs original fixings with some drilling required. The rear kit mounts within the rear coil spring and also acts as a relocation device for the spring and the lower contact pad incorporates a spring retainer. The Terrafirma hydraulic bump stop kit is designed to fit with any spring and shock combination.