British made Galvanised Unglazed For Series 3 RH Front Door
*FREE FRONT FULL TOP GLAZING KIT INCLUDED SP234*
Hot dipped galvanised Series 3 door top to fit series 3
models between 1971-1985.
The very best Series door tops on the market.
These are the later units which take the plastic square
window lock in the lower part of the frame (as opposed to the earlier Series 2
type which has the metal lock fitted to the top of the frame)
As per original spec these have an aluminium skin so
combined with the galvanised frame these will last a very long time indeed!
Our Door Tops are the best fitting items are manufactured
by us. We are not a middle man! We take a lot of time and effort making our
doors as accurately as possible and pay a lot of care and attention to detail
they could easily be mistaken for original items.
The frame is hot dip galvanised giving it a thick coat of
zinc on both the outside & inside so will last a very long time. Standard
door tops on the market have a bare steel frame clad with a bare alloy skins
and always show signs of rust after only a very short amount of time. With our
high quality galvanised units you will only need to replace these once. We feel
with the price and expectations of old Series Land Rover models going up that
they now deserve the very best parts fitting to them and fitting galvanised
units is the only way to go. Gone are the days of fitting cheaply made
"bare frame on bare skin" doors which let any paint job down after
only a few years.
The threads are free from zinc, so no re-tapping of threads
and are a ready to bolt on door top.
We are sticklers for attention to detail and even the studs
are made with the correct 7/16th UNF thread as per original spec and not a
cheaper M12 thread as with others on the market. Comes with 2 washers & 2
7/16th nuts to suit.
Comes in bare hot dipped galvanised finish so before
painting you will need to use mordant solution or t-wash to prime the surface
first before painting..