Pair Hot dipped galvanised brackets with 4x stainless nuts and 4x stainless washers

Seatbelt reel mounting bracket to fit all Defender 90 and 110 models (excluding 110 station wagon models) from 1983-2016

This is the bracket which bolts under the rear tub and has 2 threaded bolts which poke through 2 holes behind the front seats. This is what the seatbelt reel bolts to and is often very rusty. As this providesthe secure mounting for the seatbelt reel to the chassis this is a part we recommend to replace if yours is rusty.

This part due to being fixed under the vehicle often become very rusty over time, these are hot dipped galvanised so will last a lot longer than original.

The 2 threaded studs are clear of zinc so the nuts will it straight on.

Please note that galvanising is an industrial process and there are some imperfections, i.e. excessive galv, lumps and bumps and in some instances where there was too much excessive galv, they have been flattened off before reaching mild steel and cold galv spray has been applied.