Home > Parts for Defender​® > Body Panels and Body Parts > Doors & Ancillaries > Front Doors & Ancillaries > Front Row Doors >

JWP5060 - Galvanised Def Fully Built up Complete RH Front Door with Door Card and Hinges (2-4 Week Leadtime)

JWP5060 - Galvanised Def Fully Built up Complete RH Front Door with Door Card and Hinges (2-4 Week Leadtime)

Alternative Views:

Our Price: £939.95 (1,127.94 inc VAT If in UK)

Product Code: JWP5060

Type Of Internal Door Latch?*:
Aftermarket - FQJ500240
Genuine - FQJ500240 [Add £124.95]

Type of locking?*:
Central Locking [Add £35.00]

Type of push button door handle?*:
With Blanked off lock hole (83-05)
With 16mm Diameter lock hole (83-02)
With 20mm Diameter lock hole (02-05) [Add £15.00]

Type of winder mechanism?*:
Electric [Add £40.00]

What colour door card?*:
Dark Grey
Light Grey

With door loom?*:
No loom
With loom [Add £40.00]

Is this for LHD or RHD vehicle?*:

Galvanised Def Fully Built Up Complete RH Front Door - Steel Skin

  • This door is ready to bolt on - held on the bulkhead with 4x bolts - this is all you need to swap your door!
  • This is a fully built-up brand new RH front door with hot dip galvanised frame with zintec steel skin for Defender models 1983-2005.
  • These save hours in labour time and are the best doors on the market, it has great longevity & you know its provenance as it is a brand new item.
  • The doors are unique to us, we are the only company selling fully built-up doors that are ready to bolt onto your Defender.
  • Every nut, bolts and screw used to attach the parts to the door are stainless steel.
  • They come with the option of the small diamater lock push button door handle (for Defender 1983-2002) and also the option of the large diameter lock push button door handle. (For Defender 1983-2002). Or with the option of a blanked off push button door handle (normally found on central locking models).
  • If you do not know which you have just measure the lock diamater. The smaller type is 16mm in diamater, the larger lock 20mm.
Important note, you must not sand off any of the zinc coating on the skin before painting as this will remove the zinc coating and remove it corrosion resistance.
The zinc coating on the skin is perfectly smooth as it is applied electronically. Whoever paints the panel must be given the instructions to simply go over the skin and frame with Mordant solution / T wash which etches the zinc finish black and means the paint will properly adhere. You should then go over with an etch primer, then a high build primer and then finally your colour coats.
Do not sand the skin at all before any paint is applied.