BlakGlass® Pair of OEM Style Sliding Windows to fit all Defender 90 & 110 models 1983-2016

These are made with the correct factory spec, very slight green tint, as used on all County & XS models.

Are your current windows rattling or leaking? Then replacing the units with full brand new units like these is the best way to go

Also ideal if you are converting a solid panel van to County spec, as having windows in the side of your Defender greatly improves visibility and also the light into the cab

The window cutout is the standard size which is 1058mm wide by 427mm high.

If you are retrofitting these into a van model, we also sell the template to mark out the cutout under part number BG1219

We use OEM style window latches to match the factory fitment, most other replacement sliding windows on the market come with different design latches which look completely wrong

We have had these made to the 2004-2016 specification which has the 50mm radius on the top corners and 70mm radius on the bottom corners. The reason being that these 50mm/70mm windows will replace both the earlier 1983-2003 windows and also the 2004-2016 windows. However if you tried to fit the earlier 50mm/50mm radius windows to later models, you would have to cut out more on the corners.

This is the same with the inner trim panels too (if fitted), these will work with both the earlier interior trims panels as well as the later trim panels.

Made to the original Land Rover quality and specification, but these do not rattle or leak. Instead of using felt in the window channels, which rots away or is the perfect growing place for moss, we use proper rubber channel.

This kit includes the rivets to attach them and also the rubber strip to cover the rivet heads. All as factory specification.

The glass is fully road legal & E marked toughened glass