This will not take the weight of the spare wheel, so is ideal if you do not want the spare wheel on the back or are using a swingaway wheel carrier
Made in the UK, the frame is steel with a aluminium skin as original and there is bonding between the frame and the skin.
Comes in a black powdercoat so is an ideal base (after flatting down with a scotch pad or fine wet and dry paper) to then go over with your colour coats.
Great value door as it comes with the holes in the frame for your door card and for other other components so is literally ready to bolt on.
Please note, when fitting any replacement rear door, you may need to elongate the 6 hinge holes in the body to give you full adjustment. When Land Rover fitted the rear door on the production line, the 6 hinge holes in the body where only drilled after Land Rover offered the door (with the hinge bolted onto the door) into place on the vehicle. Wherever the hinges lay on the body, a factory worker would then drill the holes in the body by hand even right up to end of production in 2016. As a result the hinge holes in the body of every Defender does vary and after measuring many vehicles we have found they can vary by as much as 10mm in any given direction. A lot of the time you will not need to do this, however if you do it is easily sorted by running a drill through back and forth to elongate the holes and is nearly always covered by the hinge.
