Home > Parts for Defender​® > Body Panels and Body Parts > Doors & Ancillaries > Series Style Door Conversion Kits (Anti Burst) >

JWP7101 - Galvanised Series Style Front Door Conversion Kit for Defender (No Cappings) (S)

Land Rover Defender Series Front Split Doors


 
Alternative Views:


Our Price: £499.95 (599.94 inc VAT If in UK)


Product Code: JWP7101
Qty:

Description
 

Galvanised Pair of Bespoke Series Style Doors To Suit Defenders 1983- Present

This is the full kit that you need to do the swap over from push button doors to this 2 piece type!


The parts in this kit are:


· Pair Of Galvanised Door Bottoms

· Pair Of Galvanised Glazed Door Tops (glass fully fitted)

· RH & LH Anti Burst Handles

· RH & LH Strikers For Handles

· 2 x Door Top To Bottom Seals

· 3 x Barrel Lock & Key Set

· 2 x Plastic latches

· 2 x Lock hole surrounds

· 2 x Series front door handle fixing kits

· 4 x 3/8th dome head screws for the plastic latches

· 4 x Captive Plates

· 4 x M6x20mm flaged bolt

In this kit, these are the only Series style defender door bottoms you will find in the world that are made specifically to convert all Defenders to the simpler and more robust Series split doors.

These doors and tops are fully hot dip galvanised framed with aluminium skins as per factory spec. The threads on the door tops & pre-heat taped so no need to re tap them, they are ready to fit out of the box.

Before today the only option to do this yourself is to buy standard series 3 or series 2 door bottoms and tops and modify and add various brackets to make them fit Defenders. The main problem was that the check strap bracket is completely different and in the wrong place on standard series doors.

Also normal series doors lack the lever that’s pushes the interior light switch on and off which also acts as part of the intruder alarm system from mid-1990 models onwards. These are made by the same company that makes Defender push button doors so the same jig and bracket has been used on these doors so it is in exactly the right place. Our bespoke doors bolt straight onto any Defender 90/ 110/ 130 1983- present and replicate all of the original functions your vehicle needs. These simply bolt onto you existing hinges! The only extra things you need to do to fit is to drill the 2 new holes for the striker on the vehicle as the strikers for lift up handles doors are in a slightly different place to push button doors.

Benefits of converting to 2 part doors:

1. Much cheaper than new push button doors

2. Much simpler and less to go wrong as there is no winding window mechanism to go wrong!

3. These frames will not rot.

4. Lift up handles are much stronger against theft prevention as the lock design is stronger

5. Lift up handles are off-road safe as they do not protrude out of the door like the plastic push button handles do.

6. Much more elbow room inside the cabin

7. Removable door tops if you have a soft top or just wish to let more air in!